NZ Work Boat Review

NZ Work Boat Review 2013

The only specialised marine publication in Oceania that focuses on the maritime industry, from super yachts to small craft to large commercial ships, including coastal shipping, tugs, tow boats, barges, ferries, tourist, sport-fishing craft, je

Issue link: https://viewer.e-digitaleditions.com/i/102792

Contents of this Issue

Navigation

Page 26 of 84

Crossing the Karitane Bar The day's catch is kept alive in the live cray wells Vessel helm and pot hauling are both close at hand The splitter drum and pot davit is mounted to starboard allowing the skipper and crew to coordinate easily as they work together recovering the pots. The modern hydraulics are working well and Truby King is recovering the heavy pots 30 percent quicker than Sea Slave, which is also no slug in the cray fishing world: it all adds up to improved time efficiency. There are three single berths in the for'ard accommodation, a double, and a small head and shower compartment. Truby King is essentially a day boat with overnight capability. The deckhouse has a small settee for the crew to rest with a functional galley that has a small sink along with the two burner stove and oven. A food icebox is also provided to keep lunches and drinks cool. The helm station is well positioned for maximum visibility and ease of access to all the electronic aids. Alan runs two systems on board. He has the same systems on all his vessels for transportability so that the crews only have to learn one system. Each of the boats are a backup 24 NZ WORKBOAT REVIEW 2013 The large working deck and bait box for the other so that if for example, Sea Slave sets the gear and cannot recover it, data cards can be swamped from one boat to the next and its all action for the crew with no time lost. Jason Hollands of Navcom Electronics Ltd supplied and installed the onboard electronics. These are a Furuno NavNet system, with Furuno Navnet VX2 10.4" Multifunction Navigation Display, Furuno Radar 4kW and Furuno Sounder 1kW, all interfaced, along with a JRC 2000 plotter sounder as a back up system. There is also the Furuno Autopilot Navpilot 711 to act as slave when required and the usual radio communications and other add-on's one would expect on a commercial vessel. Outside, there is 20 square metres of working deck space for pots and deck stowage, and the pot stowage on deck has been fitted with an alloy Tauranga tuck. Below the cockpit sole are two underfloor cray wells holding 1000 litres of water aside, plus the one tonne bait and fish icebox. Also under the floors are the 1600 litre

Articles in this issue

Archives of this issue

view archives of NZ Work Boat Review - NZ Work Boat Review 2013